Liquid Glass® Polish/Finish
Liquid Glass. The Ultimate Polish/Finish.
16 oz. Liquid Glass Polish $26.95 each
This amazing special formula makes it possible to coat your vehicle with a clear, hard, smooth, and mirror-like finish with a minimum of effort. The finish will not crack, chip, peel, or turn yellow. Liquid Glass is safe for use on today's clearcoats, gelcoats, acrylics, metalflakes, candy apples, pearls, plastic paints, epoxies, urethanes, etc. Also does an excellent job on chrome, aluminum, stainless steel, brass, etc.
Use on automobiles, trucks, vans, RV's, motorcycles, and other vehicles. Provides excellent protection against normal road, atmospheric, and other sources of pollution, dirt, etc. Retards oxidation of painted metals and fiberglass. Also use on aircraft to protect, keep clean, and reduce surface friction. It also has hundreds of uses in and around the home, (for example, Formica, ceramic tile, jewelry, glass, sporting and camping equipment, etc.) For Application Instructions, CLICK HERE.
Also in available in Half-Pints...
An economical 8 oz can of the famous Liquid Glass Polish/Finish is also available, as well as a one gallon container, which is ideal for detailers or large projects.
8 oz. Liquid Glass Polish $16.95 each
Gallon Liquid Glass Polish $159.95 each
Other Liquid Glass Products:
Before using, shake can well! The surface must be clean and dry. All wax residue on vehicles should be removed. We recommend the use of Liquid Glass Pre-Cleaner. Our Pre-Cleaner will ensure optimum results by prepping/cleaning dull, stained, oxidized, or previously waxed surfaces, thus enabling the Liquid Glass Polish/Finish to adhere better to the applied surface.
Apply Liquid Glass sparingly, but evenly, using a coarse cotton cloth in a straight back and forth movement. Apply one section at a time. The ideal applied surface temperature should be between 50 and 80 degrees. (If any paint color appears on the cloth, it is oxidized paint that must be removed to reveal the good paint layer beneath.) After a haze appears on the surface, wipe off with a clean, dry cloth. Terry cloth or Turkish towel may be used.
For best results, allow at least four hours between coats to permit "curing." When finished, "baking" vehicle in the sun will bond Liquid Glass Polish/Finish to the surface. The greater the number of coats, the greater the protection afforded. Liquid Glass Wash Concentrate can be used to remove debris and refreshen between coats.
Occasionally on dark colored vehicles, streaking may occur. Temperature, previously used wax products, and buffing cloths are all things that can affect streaking. Streaks can be eliminated by rebuffing the surface with a damp cloth.
Liquid Glass Polish/Finish can be applied to any nonporous surface including aluminum, stainless steel, brass, glass, ceramic tile, etc. There are thousands of uses for business or in the home. Caution should be used, however, since a long-lasting slippery finish can be dangerous in places (for example, bath tub or shower floor). Do not use on porous surfaces such as fabrics, upholstery, leather, vinyl, etc.
FOR REPAINTING ONLY: Liquid Glass may be removed by first washing with a strong solution of high quality car wash detergent, then using 00 steel wool with mineral spirits or Varsol. (This same procedure should be used to remove any wax product from a vehicle before repainting.) Wipe dry and sand with desired grade of sandpaper before repainting.
ShopMPT.com, 6-B Hamilton Business Park, 85 Franklin Road, Dover, NJ 07801
Hours: Monday - Friday, 8:00 am to 5:00 pm, Eastern Time
Toll Free: (800) 351-0605
Phone: (973) 989-9220 Fax: (973) 989-9234
MPT Products | Liquid Glass Products | Liquid Glass Legend | Liquid Glass Polish/Finish | Liquid Glass Detail Spray | Liquid Glass Pre-Cleaner | Liquid Glass Wash Concentrate | Connoisseur's Choice Protectant | Connoisseur's Choice Cleaner | Nautical Liquid Glass | Liquid Glass Total Appearance System Kit | Auto Chic Car Covers | Auto Chic Armrests
© 2011 MPT Industries. All Rights Reserved.